Zoom
Stereo Class D Audio Amplifier with IR Remote Control
Stereo Class D Audio Amplifier with IR Remote Control

Stereo Class D Audio Amplifier with IR Remote Control

  • Manual or remote volume control
  • Standby (red) / ON (green) indicator
  • Screw terminals for 24-12 gauge wire
  • Speaker protection circuit
  • Dimensions (WxDxH): 145mm x 97mm x 41mm
SKU: SS-STPA-01 Categories: , Tags: ,

Description

The SyncSound™ Stereo Class D Audio Amplifier with IR Remote Control allows you to power and control your speakers for a very cost-effective stereo. Once the wires are stripped, screw them into the terminals provided and plug them into the back of the amplifier. Supports 24-12 gauge wire and features a speaker protection circuit that turns the system off if it becomes overloaded.

Related products

  • Square Replacement Grills for 6" In-Ceiling Speakers
    SYNCSOUND , Accessories

    Square Replacement Grills for 6″ In-Ceiling Speakers

    • Paintable Square replacement grill
    • Neo magnetic grill
    • Replace the grill in seconds
    • Thin-bezel rimless grill
  • In-Ceiling Speaker 6.5" Woofer + 0.5" Tweeter w/ Back box
    SYNCSOUND , Speakers

    6.5″ 8Ω 70W In-Ceiling Speakers w/ Built-In Back Box

    • 6.5″ in-ceiling speakers (1 per box)
    • 6.5″ woofer + 0.5″ tweeter in-ceiling speakers w/ built-In back box
    • 40 – 20,000 Hz frequency response
    • Strong Magnetic & Paintable Speaker Grill
    • Flush Mount Design
    • Sensitivity (1m, 1W): 89dB
    • Speaker dimension: 232mm x 198mm (Ø x H)
    • Cut-out dimension: Ø 200mm
    • Thin-bezel rimless grill held by neo magnets
  • In-Ceiling Speaker 6.5" Woofer + 0.5" Tweeter
    SYNCSOUND , Speakers

    6.5″ 8Ω 70W In-Ceiling Speakers

    • 6.5″ in-ceiling speakers (2 per box)
    • 6.5″ woofer + 0.5″ tweeter
    • 50 – 20,000 Hz frequency response
    • Strong Magnetic & Paintable Speaker Grill
    • Flush Mount Design
    • Sensitivity (1m, 1W): 89dB
    • Speaker dimension: 232mm x 92mm (Ø x H)
    • Cut-out dimension: Ø 200mm
    • Thin-bezel rimless grill held by neo magnets
  • Digital Audio to Stereo Audio Converter with Loop out Function
    SYNCSOUND , Accessories

    Digital Audio to Stereo Audio Converter with Loop out Function

    • Digital To Analog (DAC): Coaxial or optical digital input, with coaxial taking priority
    • Dual analog L/R output (RCA)
    • Digital input: coaxial & optical
    • Supported LPCM digital audio format
    • Input impedance: 75 ohm
    • Minimum load impedance: 10K ohm
    • Sampling rate: 32 kHz – 192 kHz
    • DC input voltage/polarity:
    • 12V / center positive
    • Dimensions (LxWxH): 88.4mm x 64.5mm x 29mm